It is very important to purchase and maintain the mask equipment. The main maintenance can be done properly, and the equipment is smooth in operation. The masks produced meet the standard. Here’s a look at some common problems and solutions:

I. Appearance:

Masks are used to wear on the face, and some even need to be used in the operating room, so the production of masks must be cleaned by mask machine every day. We can arrange staff to clean the working surface of the equipment and the plate of the mask after power off at the end of every day. We should be careful not to use water or oil. Alcohol and other non-toxic and volatile cleaning fluids can be used.

Ii. Ultrasonic system:

Check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer, welding head is necessary to monotonically clean without water, whether the connection line is robust. Often inspect ultrasonic welding head (die) for wear. Pay attention to check the ultrasonic electric box voltmeter and ammeter pointer is normal.

Iii. Transmission System:

Transmission system includes motor, gear, reducer, sprocket, chain, conveyor and other components, mask machine protection needs to check whether there is dust on the surface of the motor and other things affecting the heat dissipation, whether the gear and sprocket are lubricate, whether there are attachments. Whether the chain tightness is appropriate whether there is foreign body, the transmission parts of the connection screw is loose. Is the lubricating oil of reduction gear enough? Usually between 1000 hours and 1500 hours a replacement is required.

Iv. Electrical System:

Check whether the circuit connector of mask machine equipment is loose, whether the main power cord, branch signal cord is worn? Aging? Loose? Electric box inside is clean and monotonous, exhaust fan is normal work and so on.

5. Pneumatic system:

Is there water in the air filtration test? Check whether there is air leakage in the air pipe? Is there any leakage in the cylinder? Cylinder magnetic shield sensor orientation and working is not normal.

In addition: the equipment should not touch easily corroded liquid and object, for example: sweat is very simple to cause the equipment parts to rust. If the equipment is not used for a long time, the transmission system of the mask machine and the parts that are easy to rust should be coated with anti-rust oil.

Mask manufacturers according to the need to protect the mask production equipment, not only can reduce the number of repair mask machine, but also can advance the working life of mask machine, thereby supplying the production power of the company.